Table of Contents
Advertisement
Adjusting the
Motion-Control Levers
Adjusting the Height
You can adjust the motion-control levers higher or
lower for maximum comfort
Figure 10
Adjusting the Tilt
You can adjust the motion-control levers forward or
rearward for your comfort.
1.
Loosen the upper bolt holding the control lever
to the control-arm shaft.
2.
Loosen the lower bolt just enough to pivot the
control lever forward or rearward
3.
Tighten both bolts to secure the control lever in
the new position.
4.
Repeat the adjustment for the other control lever.
(Figure
10).
g027252
(Figure
10).
Converting to Side
Discharge
Machines with 107 cm (42-inch)
Mower Decks
The mower deck and mower blades shipped with the
machine were designed for optimum mulching and
side-discharge performance.
Removing the Discharge Cover for
Side-Discharging
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Release the flexible latch from the latch retainer
on the discharge cover and pivot the discharge
cover to the right
1. Latch retainer
2. Latch
4.
Release the hook-shaped latch on top of the
discharge cover from the pivot rod
5.
Angle the metal tab on the discharge cover out
of the slot in the bracket welded to the mower
deck
(Figure
12).
19
(Figure
11).
Figure 11
3. Discharge cover
(Figure
g230251
15).
Advertisement
Table of Contents
