Toro GrandStand 74534 Service Manual page 139

HYDRAULIC DRIVE SYSTEM
5. Place one friction composite washer and steel
washer onto the pivot bolt (Fig. 440).
B. Secure the idler assembly with a nut (Fig. 441).
6
6-6
Fig. 440 DSCN-2795a
Fig. 441 DSCN-2799a
6. Position the pump drive belt around the engine, idler
and pump pulleys (Fig. 442).
E
D
Fig. 442
A. Hydraulic pumps
B. Idler pulley
C. Clutch pulley
7. Install the extension spring from the idler bracket to
the spring anchor (Fig. 443).
Fig. 443
36" & 40" Toro GrandStand Service Manual
A
B
C
F
fig. 67 G012686
D. Clutch retainer
E. Pump drive belt
F. Pump drive pulley
DSCN-2660a