Throttle Cable Replacement; Throttle Cable Removal - Toro GrandStand 74534 Service Manual

CONTROLS
9. While holding the engine choke lever in the "OPEN"
position, pull the slack from the cable jacket, then
secure the position of the choke cable with the screw
and cable clamp (Fig. 282).
4
10. Secure the choke and throttle cable to the oil drain
using a cable tie (Fig. 283).
11. Ensure the choke is functioning correctly by moving
the choke knob in and out while observing the choke
plate in the carburetor throat.
4-28
Fig. 282 DSCN-3530a
Fig. 283 DSCN-3511a

Throttle Cable Replacement

Throttle Cable Removal

1. Remove the bolt and cable clamp securing the
throttle cable to the engine throttle plate (Fig. 284).
Fig. 284
2. Remove the "Z" bend of the throttle cable from the
engine throttle arm (Fig. 285).
Fig. 285
36" & 40" Toro GrandStand Service Manual
DSCN-3505a
DSCN-3535a