Ignition Switch Installation - Toro GrandStand 74534 Service Manual

ELECTRICAL

Ignition Switch Installation

1. Install the switch in through the control panel. En-
sure that the mounting clips have secured the switch
in the control panel (Fig. 746).
Note: The switch must be orientated so it can be
read from the operator position (Fig. 747).
8
8-12
Fig. 746 DSCN-2224a
Fig. 747 DSCN-2227a
2. Install the spade connector with the two pink wires to
the "I" terminal of the switch (Fig. 748).
Fig. 748
3. Install the wire harness to the switch (Fig. 749).
Fig. 749
36" & 40" Toro GrandStand Service Manual
DSCN-2232a
DSCN-2234a