Toro GrandStand 74534 Service Manual page 46

30. Thoroughly clean the area around the hydraulic
fittings, then mark the pumps and fittings to ensure
they are returned to their original location upon
assembly (Fig. 104).
Fig. 104
31. Remove the four high pressure hoses from the
pumps. Cap the hose ends and pump fittings to
prevent debris from entering the system (Fig. 105).
Fig. 105
36" & 40" Toro GrandStand Service Manual
32. Remove the bolts and nuts securing the control
cable ends to the pump control arms (Fig. 106).
DSCN-4039a
33. Remove the carriage bolts and flange nuts securing
the cable clamp bracket to the engine base (Fig.
107).
DSCN-4054a
CHASSIS
Fig. 106 DSCN-4048a
Fig. 107 DSCN-4050a
3
3-27