31. Remove the engine from the engine base (Fig. 781).
Fig. 781
32. Remove one spark plug and feed a minimum of two
feet (61cm) of 3/8" (.95cm) rope into the cylinder to
prevent engine crankshaft rotation (Fig. 782).
Note: Rotate the crankshaft as needed to permit
feeding the rope into the cylinder.
Fig. 782
36" & 40" Toro GrandStand Service Manual
33. Remove the bolt, spring washer, and washer
securing the clutch to the engine crankshaft (Fig.
783).
DSCN-2587a
34. Remove the clutch from the engine crankshaft.
IMG-9634a
ELECTRICAL
Fig. 783
IMG-9630a
8
8-21