Operator Presence Control (Opc) Switch Installation - Toro GrandStand 74534 Service Manual

Operator Presence Control (OPC) Switch
Installation
1. Loosely install the two screws and threaded plate
that secure the switch to the control handle as-
sembly (Fig. 839).
Fig. 839
2. Move the RH control lever to the operating position
(Fig. 840).
Fig. 840
36" & 40" Toro GrandStand Service Manual
3. Position the switch so there is an 1/8" (3mm) gap
between the switch plunger and the tab on the
handle as sembly (Fig. 841).
A. 1/8" (3mm)
DSCN-2291a
4. Secure the position of the switch by tightening the
two mounting screws (Fig. 842).
DSCN-2294a
ELECTRICAL
A
Fig. 841 DSCN-2295a
Fig. 842 DSCN-2291a
8
8-37