MOWER DECK
11. Remove the carriage bolt, washer, and flange nut
securing the idler pulley to the idler arm (Fig. 598).
7
7-16
Fig. 598
DSCN-3462a
36" Mower Deck Belt Idler Installation
1. Install the upper and lower bushings into the idler
arm hub (Fig. 599).
Fig. 599
2. Install the grease fitting into the idler arm hub (Fig.
600).
Note: Install the fitting so it is pointing upwards.
Fig. 600
36" & 40" Toro GrandStand Service Manual
DSCN-3465a
DSCN-3468a