40" Mower Deck Lh Spindle Belt Removal - Toro GrandStand 74534 Service Manual

40" Mower Deck LH Spindle Belt Removal

1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1" (25mm) HOC.
3. Remove the belt covers.
4. Remove the RH extension spring from the anchor
post (Fig. 551).
Fig. 551
5. Remove the RH belt from the deck pulleys (Fig.
552).
Fig. 552
36" & 40" Toro GrandStand Service Manual
6. Remove the LH extension spring from the anchor
post (Fig. 553).
7. Remove the LH belt from around the deck and clutch
pulleys (Fig. 554).
DSCN-3117a
DSCN-3119a
MOWER DECK
Fig. 553
Fig. 554
DSCN-3121a
7
DSCN-3124a
7-3