10. Remove the bolt and jam nut from the motion control
assembly (Fig. 205).
Fig. 205
11. Remove the four plastic bearings from the motion
control assembly (Fig. 206).
Fig. 206
36" & 40" Toro GrandStand Service Manual
RH Motion Control Lever Installation
1. Install the four plastic bearings to the motion control
assembly (Fig. 207).
DSCN-3634a
2. Loosely secure the adjustment cam to the RH
control lever (Fig. 208).
Note: This nut will be tightened later in the process.
DSCN-3637a
CONTROLS
Fig. 207
DSCN-3637a
Fig. 208
DSCN-3629a
4
4-7