Toro GrandStand 74534 Service Manual page 186

3. Secure the idler pulley to the idler arm using the
carriage bolt, washer, and flange nut (Fig. 601).
Fig. 601
Note: The taller side of the idler pulley hub faces the
idler arm (Fig. 602).
Fig. 602
36" & 40" Toro GrandStand Service Manual
4. Install the spacer into the idler arm assembly (Fig.
603).
DSCN-3480a
5. Position the bolt, upper and lower washers, onto the
idler arm assembly (Fig. 604).
DSCN-3239a
MOWER DECK
Fig. 603
Fig. 604
DSCN-3482a
7
DSCN-3487a
7-17