Toro GrandStand 74534 Service Manual page 122

5. Install the oil drain assembly into the engine sump
(Fig. 379).
Note: Position the oil drain assembly with the exit
port pointing downward, then secure the
position with the jam nut.
Fig. 379
6. Remove one spark plug and feed a minimum of two
feet (61cm) of 3/8" (.95cm) rope into the cylinder to
prevent engine crankshaft rotation (Fig. 380).
Note: Rotate the crankshaft as needed to permit
feeding the rope into the cylinder.
Fig. 380
36" & 40" Toro GrandStand Service Manual
7. Install the key into the engine crankshaft keyway and
apply anti seize around the crankshaft (Fig. 381).
8. Install the drive pulley onto the engine crankshaft
DSCN-2602a
with the large hub towards the engine (Fig. 382).
IMG-9634a
ENGINE
Fig. 381 DSCN-2603a
Fig. 382 DSCN-2605a
5
5-11