36" Mower Deck Belt Replacement
36" Mower Deck Belt Removal
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1" (25mm) HOC.
3. Remove the belt covers.
4. Remove the extension spring from the anchor post
(Fig. 544).
Fig. 544
5. Remove the belt from the deck and clutch pulleys.
36" & 40" Toro GrandStand Service Manual
36" Mower Deck Belt Installation
1. Route the belt around the deck and clutch pulleys
(Fig. 545).
DSCN-3449a
2. Install the extension spring to the idler bracket and
spring anchor (Fig. 546).
3. Install the belt covers.
MOWER DECK
Fig. 545
Fig. 546
fig. 119-0186
7
DSCN-3449a
7-1