Toro GrandStand 74534 Service Manual page 179

MOWER DECK
7. Install the upper bearing into the spindle housing
(Fig. 577).
8. Position the bearing spacer in the spindle housing
(Fig. 578).
7
7-10
Fig. 577 DSCN-3193a
Fig. 578 DSCN-3195a
9. With the bearing spacer centered in the housing, fill
the cavity between the spacer and housing with high
temp grease (Fig. 579).
Fig. 579
10. Install the lower bearing into the spindle housing and
add a couple of pumps of high temp grease to the
center of the bearing spacer. (Fig. 580).
Fig. 580
36" & 40" Toro GrandStand Service Manual
DSCN-3198a
DSCN-3202a