Rear Strut Installation - Toro GrandStand 74534 Service Manual

MOWER DECK

Rear Strut Installation

1. Apply a thin layer of grease to the outer lip of the
suspension bushing (Fig. 678).
2. Using an arbor press, install the suspension bushing
into the strut (Fig. 679).
7
7-38
Fig. 678 DSCN-3362a
Fig. 679 DSCN-3363a
3. Install the spacer into the suspension bushing (Fig.
680).
Fig. 680
4. Repeat steps 1 through 3 on the other end of the
strut.
5. Loosely install the bolt, washer, and nut securing the
rear of the strut to the frame (Fig. 681).
Fig. 681
36" & 40" Toro GrandStand Service Manual
DSCN-3366a
DSCN-3352a