MOWER DECK
10. Remove the two flange nuts securing the engine
base to the top of the mower deck (Fig. 699).
11. Place a 2"x4" under each side of the mower deck,
then lower the deck onto the boards (Fig. 700).
7
7-44
Fig. 699
DSCN-3412a
Fig. 700
DSCN-3414a
12. Remove the bolt, washer and nut securing the front
strut to the mower deck (Fig. 701).
Fig. 701
13. Remove the four flange nuts securing the lift chains
to the mower deck (Fig. 702).
Note: The HOC handle will spring to the transport
position once the deck is unsecured.
Fig. 702
36" & 40" Toro GrandStand Service Manual
DSCN-3415a
DSCN-3419a