FlexiSTARTER Quick Start Guide
ValueCut USER MANUAL
8 FlexiSTARTER Quick Start Guide
8.1 Introduction
FlexiSTARTER ValueCut Edition is a special software to plot AI / EPS / PDF...etc format data from the
ValueCut with a simple operation.
8.2 Install of the FlexiSTARTER
Note: Please do not put the attached the USB Hardware Key in the
computer until after software is installed.
Please insert the DVD for installation of the ValueCut into the computer. Please open it and click on
1"English".
1
2
Click on 2"Install FlexiSTARTER ValueCut Edition". Then, the installer of the FlexiSTARTER ValueCut
Edition may start up. Install following the wizard.
70
V5a 2015 Jan