Mitsubishi Electric MELSEC Q Series Programming Manual page 144

4 PARAMETERS FOR POSITIONING CONTROL
Speed
S.R.
A2R
Vacc
A1R
Acceleration
AmaxA
(1) There are patterns (below pattern 1 to 4 respectively) that depends on the
positioning speed of the acceleration pattern/deceleration pattern of advanced S-
curve acceleration/deceleration.
Trapezoidal acceleration
/deceleration
2)
3)
4)
1)
2)
3)
4)
Fig.4.5 Acceleration pattern
Pattern 1): Positioning speed = S.R.
Pattern 2): Vacc < Positioning speed < S.R.
1)
Pattern 3): Positioning speed = Vacc
Pattern 4): Positioning speed < Vacc
Time
(Note): The graph of deceleration is opposite to
acceleration because the deceleration
pattern is negative acceleration.
Time
4 - 23