FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Figure 8-26 Installing the supercapacitor holder
Step 11 Install the air duct for the supercapacitor.
Step 12 Install the server node.
For details, see
Step 13 Power on the server node.
For details, see
----End
8.4.7 Removing the Avago SAS3004iMR PCIe RAID Control
Card
Procedure
Step 1 Power off the server node.
For details, see
Step 2 Remove the server node.
For details, see
Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 5 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
For details, see
RAID Controller
Step 6 Remove the Avago SAS3004iMR RAID controller card.
For details, see
Step 7 Place the removed component in an ESD bag.
----End
Issue 07 (2019-12-20)
8.3.4 Installing an XH321
8.3.1 Power-On
Procedure.
8.3.2 Power-Off
8.3.3 Removing an XH321
8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe
Card.
8.4.19 Removing a PCIe
Copyright © Huawei Technologies Co., Ltd.
V5.
Procedure.
V5.
Card.
8 Parts Replacement
63