Removing A Pcie Card; Removing A Pcie Card From A Riser Card - Huawei RH2288H V3 User Manual

RH2288H V3 Server
User Guide
Step 9 Install the chassis cover. For details, see
Step 10 Install the RH2288H V3. For details, see
Step 11 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 12 Power on the RH2288H V3. For details, see
----End

7.21 Removing a PCIe Card

A PCIe card can be installed on the mainboard or on a riser card. The following
describes how to remove a PCIe card from the mainboard or from a riser card.

7.21.1 Removing a PCIe Card from a Riser Card

Remove a PCIe card before replacing it with a new one or removing the riser card
where it is installed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288H V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see
Removing the
Step 6 Remove the chassis cover. For details, see
Step 7 Remove all cables from the riser card if any.
Step 8 Remove a riser card tray. Lift the riser card tray. See
Issue 46 (2022-12-28)
Cables.
Server.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
Figure 7-37.
7 Replacing Parts
Cover.
3.5
Server.
Server.
3.6
Cover.
180