Trace[1]|2:State <Boolean - Keysight Technologies P Series Programming Manual

13 TRACe Subsystem
TRACe[1]|2:STATe <boolean>
This command enables or disables trace capture for the specified channel.
Syntax
Example
Reset Condition
On reset trace capture is set to OFF.
Query
TRACe[1]|2:STATe?
The query command enters a 1 or 0 into the output buffer indicating whether or
not trace capture is enabled or disabled.
– 1 is returned when trace capture is enabled
– 0 is returned when trace capture is disabled
560
TRAC
1
2
TRAC2:STAT 1
Space
:STAT
?
This command enables trace capture for
Channel B.
0|OFF
1|ON
Keysight N8262A Programming Guide