10
SENSe Subsystem
[SENSe[1]]|SENSe2:TEMPerature?
This this command to returns the P-Series power sensor's temperature in degrees
Celsius.
Syntax
Parameters
Item
numeric_value
Example
SENS2:TEMP?
Reset Condition
On reset, this parameter is not affected.
Error Messages
– If a P-Series sensor is not connected, error –241, "Hardware missing" occurs.
400
:
SENS
1
SENS2
Description/Defaul t
A numeric value defining sensor's temperature in degrees
Celsius.
: TEMP
?
This command returns the current sensor
temperature found on Channel B.
Keysight N8262A Programming Guide
Range of Values
–50 to 100