Sense[1]|2:Trace:limit:upper <Numeric_Value - Keysight Technologies P Series Programming Manual

10 SENSe Subsystem
SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>
This command sets the upper scale limit of the trace for the specified channel.
The units used are dependent on the current setting of SENS:TRAC:UNIT as shown
in
Table 10-2 Measurement units
Units:
SENS:TRAC:UNIT
dBm
W
The trace lower scale limit is maintained at a lower power than the upper scale
NOTE
limit which is adjusted to be slightly greater than the lower scale limit if
necessary. Refer
page 410 for further information on setting the trace lower scale limit.
Syntax
:SENS
412
Table 10-2.
to"SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value>"
:TRAC
1
2
Units:
SENS:TRAC:LIM:UPP
dBm
W
:LIM :UPP
Keysight N8262A Programming Guide
Space
numeric_value
DEF
MIN
MAX
Space
?
on
MIN
MAX