Keysight Technologies P Series Programming Manual page 175

Item
resolution
source list
[a] The mnemonic DEF means DEFault. This is not equivalent to the DEFault parameter used in the command sub-systems. The parameters must
be entered in the specified order. If parameters are omitted, they default from the right. The parameter DEFault is used as a place holder.
Specifying DEF leaves the parameter value unchanged.
[b] When the measurement result is linear this parameter represents the number of significant digits. When the measurement result is
logarithmic 1 to 4 represents of 1, 0.1, 0.01 and 0.001 respectively.
Example
MEAS1:REL? -50DBM,2,(@2)
Keysight N8262A Programming Guide
Description/Defaul t
A numeric value for the resolution. If unspecified the current
resolution setting is used.
The channel which the command is implemented on.
If unspecified the current window setup is used. However, if the
window shows a ratio or difference measurement, the upper
window defaults to Channel A and the lower window to Channel B.
MEASurement Commands
This command queries the upper window/
upper measurement relative measurement of
Channel B, using an expected power level of
–50 dBm and a resolution setting of 2.
Range of Values
[b]
1 to 4
1.0, 0.1, 0.01, 0.001
[a]
DEF
(@1)
(@2)
2
175