Keysight Technologies P Series Programming Manual page 404

10 SENSe Subsystem
[SENSe[1]]|SENSe2:TRACe:TIME <numeric_value>
This command sets the duration of the trace for a P-Series sensor set to NORMal
mode.
Syntax
Parameters
Item
numeric_value
Example
SENS2:TRAC:TIME 0.5
404
:
1
SENS
SENS2
Description/Defaul t
The duration of the trace in seconds.
– DEF: the default value is 100 µs.
Units are resolved to 1 ns.
Space
TRAC :TIME
This command sets the duration of the trace
to 0.5 seconds for Channel B.
Keysight N8262A Programming Guide
numeric_value
DEF
?
Range of Values
10 µs to 1 second
DEF