17
IEEE 488.2 Command Reference
*RCL <NRf>
The *RCL <NRf> (ReCaLl) command restores the state of the power meter from
the specified save/recall register. An instrument setup must have been stored
previously in the specified register.
Syntax
Parameters
Type
Description/Defaul t
NRf
The number of the register to be recalled.
Error Message
– If the register does not contain a saved state, error –221, "Settings conflict"
662
Space
*RCL
occurs.
NRf
Keysight N8262A Programming Guide
Range of Values
1 - 10