Keysight Technologies P Series Programming Manual page 194

3 CALCulate Subsystem
Example
CALC2:GAIN 20
Reset Condition
On reset, the display offset is set to 0 dB (DEF).
Query
CALCulate[1]|2|3|4:GAIN[:MAGNitude]? [MIN|MAX]
The query returns the current setting of the display offset or the value associated
with MIN and MAX.
Query Example
CALC1:GAIN?
Error Message
If CALCulate[1]|2|3|4:GAIN[:MAGNitude] is set to ON while SENSe:SPEed is set
to 200, error –221, "Settings Conflict" occurs.
194
This command enters a display offset of
20 dB to the lower window/lower
measurement.
This command queries the current setting of
the display offset on the upper window/
upper measurement.
Keysight N8262A Programming Guide