Keysight Technologies P Series Programming Manual page 360

10 SENSe Subsystem
[SENSe[1]]|SENSe2:AVERage2[:STATe] <boolean>
This command is used to enable and disable video averaging for the P-Series
sensor.
Syntax
Example
AVER2 1
Reset Condition
On reset, averaging is enabled.
Query
[SENSe[1]]|SENSe2:AVERage2[:STATe]?
The query enters a 1 or 0 into the output buffer indicating the status of averaging.
– 1 is returned when averaging is enabled.
– 0 is returned when averaging is disabled.
360
:
SENS
1
SENS2
AVER2 :STAT
This command enables video averaging on
Channel A.
Keysight N8262A Programming Guide
Space
0|OFF
1|ON
?