System:communicate:lan:dhcp[:State] <Boolean - Keysight Technologies P Series Programming Manual

SYSTem:COMMunicate:LAN:DHCP[:STATe] <boolean>
This command enables the dynamic host configuration protocol.
Syntax
SYST
Example
SYST:COMM:LAN:DHCP ON
Query
SYSTem:COMMunicate:LAN:DHCP?
– 1 is returned if DHCP is enabled
– 0 is returned if DHCP is disabled
Query Example
SYST:COMM:LAN:DHCP?
Keysight N8262A Programming Guide
:COMM :LAN
:DHCP :STAT
This command enables the DHCP.
This command queries the state of the DHCP.
SYSTem Subsystem
Space
0|OFF
1|ON
?
12
455