Memory:table:frequency <Numeric_Value>{,<Numeric_Value>} - Keysight Technologies P Series Programming Manual

MEMory:TABLe:FREQuency <numeric_value>{,<numeric_value>}
This command is used to enter frequency data into the current selected table. Any
previous frequency list is cleared before the new frequency list is stored. The
frequencies must be entered in ascending order. Entries in the frequency lists
correspond as shown in
For sensor calibration tables only, the first calibration factor entered using the
NOTE
MEMory:TABLe:GAIN command is used as the reference calibration factor.
Table 7-3 Frequency and Calibration/Offset factor list
Table Power Sensor
0 None
1 8481A
2 8482A, 8482B, 8482H
3 8483A
4 8481D
5 8485A
6 R8486A
7 Q8486A
8 R8486D
9 8487A
[a] Default is a sensor calibration table in which the reference calibration factor and calibration factors are 100%. This sensor calibration table
can be used during the performance testing of the power meter.
Keysight N8262A Programming Guide
Table 7-3 with entries in the calibration/offset factor lists.
MEMory Subsystem
Table Name
[a]
DEFAULT
8481A
8482A
8483A
8481D
8485A
R8486A
Q8486A
R8486D
8487A
7
305