1
Power Meter Remote Operation
Example
The following example sets the expected power value to –50 dBm and the
resolution setting to 3 using the lower level commands. The measurement is a
single Channel A measurement carried out on the lower window.
ABOR1
CALC2:MATH:EXPR "(SENS1)" Displays Channel A on lower window
SENS1:POW:AC:RANG -50
DISP:WIND2:RES 3
INIT1
FETC2?
76
Aborts Channel A
Sets lower range (E-Series sensors only)
Sets the lower window's resolution to setting 3
Causes Channel A to make a measurement
Retrieves the lower window's measurement
Keysight N8262A Programming Guide