Operation Register Sets - Keysight Technologies P Series Programming Manual

Modular power meter
Hide thumbs Also See for P Series:
Table of Contents

Advertisement

Operation Register Sets

The following registers contain information which is part of the power meter's
normal operation. The contents of the individual registers of these register sets
may be accessed by appending the commands listed in
Commands".
The following command descriptions detail the SCPI register you require to
control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following pages.
Keysight N8262A Programming Guide
STATus Subsystem
"Status Register Set
11
429

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8262a

Table of Contents