Query; Query Example; Error Message - Keysight Technologies P Series Programming Manual

Query

CALCulate[1]|2|3|4:FEED[1]2?
The query returns the current value of the string.

Query Example

CALC1:FEED2?

Error Message

– If the command is used when no sensor is attached, error –241 "Hardware
– If <string> contains ON SWEEP[1]|2|3|4 and the feed's TRIG:SOUR is not INT
– If the command changes the measurement mode to PEAK or PTAV when a
Keysight N8262A Programming Guide
missing" occurs.
or EXT (for single channel power meters) or INT1, INT2 or EXT (for dual channel
power meters), error –221 "Settings conflict" occurs.
sensor other than a P-Series power sensor is connected or a P-Series sensor is
connected and set to AVERage mode rather than NORMal mode, error –221,
"Settings Conflict" occurs.
CALCulate Subsystem
This command queries the current setting of
the data_handle on FEED2 of the upper
window/upper measurement.
3
191