Sense[1]|2:Trace:limit:lower <Numeric_Value - Keysight Technologies P Series Programming Manual

10 SENSe Subsystem
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value>
This command sets the lower scale limit of the trace for the specified channel.
The units used are dependent on the current setting of SENS:TRAC:UNIT as shown
in
Table 10-1 Measurement units
Units:
SENS:TRAC:UNIT
dBm
W
The trace lower scale limit is maintained at a lower power than the upper scale
NOTE
limit which is adjusted to be slightly greater than the lower scale limit if
necessary. Refer to
page 412 for further information on setting the trace upper scale limit.
Syntax
:SENS
410
Table 10-1.
"SENSe[1]|2:TRACe:LIMit:UPPer <numeric_value>"
:TRAC
1
2
Units:
SENS:TRAC:LIM:LOW
dBm
W
:LIM :LOW
Keysight N8262A Programming Guide
Space
numeric_value
DEF
MIN
MAX
Space
?
on
MIN
MAX