Output:recorder[1]|2:Limit:upper <Numeric_Value - Keysight Technologies P Series Programming Manual

OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value>
This command sets the maximum scaling value for the specified recorder output.
The units used are dependent on the units currently set for the CALC block
specified in OUTPut:RECorder[1]|2:FEED <data_handle>.
Syntax
OUTP
Parameters
Item
numeric_value
Example
OUTP:REC:LIM:UPP 10
Reset Condition
On reset, the maximum scaling value is set to +20 dBm.
Keysight N8262A Programming Guide
1
:REC
2
Description/Defaul t
A numeric value for the minimum scaling value. The units
used—dBm, W or %—are dependent on the units currently
set for the CALC block specified in
OUTPut:RECorder[1]|2:FEED <data_handle>.
:LIM :UPP
This command sets the maximum scaling
value to 10.
OUTPut Subsystem
numeric_value
Space
?
Range of Values
–150 to +230 dBm
1 aW to 100 XW
0 % to 999 %
8
321