Example - Keysight Technologies P Series Programming Manual

CALCulate:MATH
(SENSe2/SENSe1)
(SENSe1/SENSe2)
(SENSe2/SENSe1)
(SENSe1/SENSe1)
(SENSe2/SENSe2)
(SENSe1/SENSe1)
(SENSe2/SENSe2)
<expected_value> returns the expected value sent by the last CONFigure
command or +20 dBm by default. Note that when the display is showing dual
windows this value is meaningless.
The <resolution> returned is the same as the value returned by
DISPlay:WINDow:RESolution?. The format of the return is <NR1> in the range 1
through 4.

Example

CONF2?
Reset Condition
On reset:
The command function is set to :POWer:AC.
The expected power level is set to +20 dBm.
The source list on the N8262A is set to Channel A for the upper measurement on
both windows and Channel B for the lower measurement on both windows.
Keysight N8262A Programming Guide
CALCulate:RELative:
STATe
OFF
ON
ON
OFF
OFF
ON
ON
MEASurement Commands
Function
:POW:AC:RAT
:POW:AC:RAT:REL
:POW:AC:RAT:REL
POW:AC:RAT
POW:AC:RAT
POW:AC:RAT:REL
POW:AC:RAT:REL
This command queries the current
configuration of the lower window/upper
measurement.
<source list>
(@2),(@1)
(@1),(@2)
(@2),(@1)
(@1),(@1)
(@2),(@2)
(@1),(@1)
(@2),(@2)
2
131