Service:sensor[1]|2:Cplace - Keysight Technologies P Series Programming Manual

16 SERVice Subsystem

SERVice:SENSor[1]|2:CPLace?

This query returns the calibration place in E-Series sensors. Calibration place
information is stored in the sensor's EEPROM.
Syntax
Example
SERV:SENS2:CPL?
Error Messages
– If no power sensor is connected, error –241 "Hardware missing" occurs.
– If a sensor other than a P-Series or E-Series power sensor is connected, error
632
SERV :SENS
–241 "Hardware missing" occurs.
1 :CPL
2
This query returns the place of calibration of
the E-Series sensor connected to Channel B.
Keysight N8262A Programming Guide
?