Keysight Technologies P Series Programming Manual page 355

[SENSe[1]]|SENSe2:AVERage[:STATe] <boolean>
This command is used to enable and disable averaging.
Syntax
Example
AVER 1
Reset Condition
On reset, averaging is OFF.
Query
[SENSe[1]]|SENSe2:AVERage[:STATe]?
The query enters a 1 or 0 into the output buffer indicating the status of averaging.
– 1 is returned when averaging is enabled
– 0 is returned when averaging is disabled
Keysight N8262A Programming Guide
:
SENS
1
SENS2
AVER :STAT
This command enables averaging on
Channel A.
SENSe Subsystem
Space
0|OFF
1|ON
?
10
355