Keysight Technologies P Series Programming Manual page 521

Table 12-37 1xeV-DV: Power meter presets for secondary channel sensors
Function
Display setup
Lower window
Lower window/lower measurement (LL)
Feed
Measurement
[a] For further information refer to
TD-SCDMA
The following table shows the power meter presets when <character_data> is
set to TDSCdma. Commands not listed are preset according to their DEFault values
(for further information refer to
Table 12-38 TD-SCDMA: Power meter presets
Command
Frequency
[SENS[1]]|SENS2:FREQ[:CW|:FIX]
Sensor measurement mode
[SENS[1]]|SENS2:DET:FUNC
Sensor video bandwidth setup
[SENS[1]]|SENS2:BAND|BWID:VID
Gate Setup
[SENS[1]]|SENS2:SWE[1]|2|3|4:OFF:TIME
Keysight N8262A Programming Guide
Secondary Channel Sensor
No Sensor
Dual numeric
[a]
Gate 1 primary channel
Pk-to-Avg
"Primary and Secondary Channels"
Setting
+1900.000 MHz
NORM
N1921/2A: LOW
Gate 1: 10 µs
Gates 2 - 4: 0
Non P-Series Sensor
Dual numeric
[a]
Secondary channel
Avg
on page 473.
Table 12-1).
Comments
Frequency setting
Measurement mode
Sensor video bandwidth
Delay between trigger point and time
gated period.
SYSTem Subsystem
P-Series Sensor
Dual numeric
Gate 1 secondary channel
(Channel B)
Avg
12
[a]
521