Example - Keysight Technologies P Series Programming Manual

Modular power meter

Hide thumbs Also See for P Series:

Table of Contents

TRIGger Subsystem

Example

TRIG:SEQ1:COUN 10

Reset Condition

On reset, the value is set to 1.

TRIGger[1]|2[:SEQuence[1]|2]:COUNt?

The query returns the current setting of trigger events for a specified channel.

Query Example

TRIG:SEQ2:COUN?

Error Messages

If COUNt >1 when [SENSe[1]]|SENSe2:MRATe <character_data> is set to NORMal

or DOUBle, error –221, "Settings Conflict" occurs.

This command sets the number of triggered

events to 10 for the Channel A measurement

This command queries the number of

triggered events for the Channel B

measurement cycle.

Keysight N8262A Programming Guide

Table of Contents