Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Keysight Technologies Manuals
  4. Measuring Instruments
  5. P5000A Series
  6. Quick start manual

Keysight Technologies P5000A Series Quick Start Manual

Usb-vector network analyzer
Hide thumbs Also See for P5000A Series:
1
2

Advertisement

Quick Links

Download this manual
P5000A Series USB-
Vector Network Analyzer
Please use ESD Precautions when handling and operating

System Requirements

Description
Operating system
Processor speed
Available memory
Available disk space
Display resolution
USB
Must install IO Libraries Suite 2018 Update 1 or greater.
a.

Installation Procedure

1. Download and install the Keysight IO Libraries Suite
at www.keysight.com/find/iosuite. Follow the installer
prompts.
2. Download the network analyzer software from
http://www.keysight.com/support/P5000A
click the Drivers, Firmware & Software tab.
3. Execute and Install the network analyzer software
according to the installer prompts.
4. Shutdown PC once the installation is done.
Requirements
Windows 7 SP1 or Windows 10 (64 bit)
Intel i5 6
th
Generation or newer/ Intel Xeon E3 v3 or newer
4 GB minimum
2 GB available drive space minimum
1024 x 768 minimum
USB 3.0 port directly connected to Intel chipset
webpage,
Quick Start Guide
a
For 4-port P502xA above 20GHz, connect
the control cable and tighten it with the nuts
as shown in the image above.

Advertisement

loading

Related Manuals for Keysight Technologies P5000A Series

Summary of Contents for Keysight Technologies P5000A Series

  • Page 1: System Requirements

    Quick Start Guide P5000A Series USB- Vector Network Analyzer Please use ESD Precautions when handling and operating System Requirements Description Requirements Operating system Windows 7 SP1 or Windows 10 (64 bit) Processor speed Intel i5 6 Generation or newer/ Intel Xeon E3 v3 or newer...
  • Page 2 (P5000A Series USB-VNA) Quick Start Guide 5. Connect the included USB 3.0 Type C cable to the P50xxA and the other end of the cable directly to a USB 3.0 port on a PC (USB 2.0 is not supported). 6. Plug in the AC adapter to the back of the instrument and then plug it into the AC power.