Display[:Window[1]|2][:State] <Boolean - Keysight Technologies P Series Programming Manual

DISPlay[:WINDow[1]|2][:STATe] <boolean>
This command enables/disables the upper or lower window (WINDow1 and
WINDow2 respectively) so that the display shows a single window only. The
displayed window is presented in expanded format, showing a single
measurement only: either the single measurement that was shown on the window,
or the currently selected measurement, if two measurements had been shown.
Syntax
Examples
DISP:WIND2:STAT OFF
DISP:WIND2:STAT ON
Reset Condition
On reset, both windows are enabled.
Keysight N8262A Programming Guide
DISP
:WIND 1 :STAT
2
This command disables the lower window.
The upper window in shown in expanded
format, displaying its currently selected
measurement.
This command enables the lower window so
that a dual window display is once more
provided.
DISPlay Subsystem
Space
0|OFF
1|ON
?
5
269