Keysight Technologies P Series Programming Manual page 58

1 Power Meter Remote Operation
– Domain Name -SYSTem:COMMunicate:LAN:DNAMe
– Hostname -SYSTem:COMMunicate:LAN:HNAMe
– Restart Networkk -SYSTem:COMMunicate:LAN:RESTart
The character_data values for the IP address, Subnet Mask, and Default
Gateway can range between 0.0.0.0 and 255.255.255.255.
If you configure an invalid IP Address or an IP address that is used by another
NOTE
device or host, an error message is generated. This error can be read by using
the SYSTem:ERRor? command.
The LAN setting values are stored in non-volatile memory and are not part of the
save-recall function.
For more information about Keysight IO Libraries software refer to the
NOTE
Connectivity Guide. If you have installed other I/O Software, refer to
documentation that accompanies the software.
58 Keysight N8262A Programming Guide