Keysight Technologies P Series Programming Manual page 177

Item
resolution
source list
[a] The mnemonic DEF means DEFault. This is not equivalent to the DEFault parameter used in the command sub-systems. The parameters must
be entered in the specified order. If parameters are omitted, they default from the right. The parameter DEFault is used as a place holder.
Specifying DEF leaves the parameter value unchanged.
[b] When the measurement result is linear this parameter represents the number of significant digits. When the measurement result is
logarithmic 1 to 4 represents of 1, 0.1, 0.01 and 0.001 respectively.
Example
Keysight N8262A Programming Guide
Description/Defaul t
A numeric value for the resolution. If unspecified the current
resolution setting is used.
This channel list specifies the channels used to calculate the
difference.
If unspecified and the current window setup is a difference
measurement then this difference setup is used, otherwise it
defaults to Channel A-B.
MEAS2:DIFF?
MEASurement Commands
Range of Values
[b]
1 to 4
1.0, 0.1, 0.01, 0.001
[a]
DEF
(@1),(@2)
(@2),(@1)
(@1),(@1)
(@2),(@2)
This command queries the difference
measurement on the lower window/
upper measurement.
2
177