Summary Of Commands - Keysight Technologies P Series Programming Manual

Summary of Commands

For detail of each SCPI (Standard Commands for Programmable Instruments)
command available to program the power meter, refer to later chapters for more
details on each command.
In different subsystems the numeric suffix of program mnemonics can represent
either a channel selection or a window selection. Refer to the appropriate
command description to verify the meaning of the numeric suffix.
With commands that require you to specify a channel, Channel A is represented
by a 1 and Channel B by a 2. If you omit the channel number, Channel A is
assumed.
With commands that require you to specify a window, the upper window is
represented by a 1 and the lower window by a 2. If you omit the window number,
the upper window is assumed.
All the commands listed also have queries unless otherwise stated in the "Notes"
column.
Keysight N8262A Programming Guide
Power Meter Remote Operation 1
119