Keysight Technologies P Series Programming Manual page 135

CONFigure[1]|2|3|4[:SCALar][:POWer:AC]:RELative
[<expected_value>[,<resolution>[,<source list>]]]
This command sets the measurement function, range and resolution of the
specified window. It sets the measurement function to single channel with relative
mode on. The relative value used is that set by the CALCulate:RELative:
MAGNitude:AUTO command.
Syntax
CONF
1
2
3
4
Parameters
Refer to
parameters in this command.
Item
expected_value
(for the expected power
level)
Keysight N8262A Programming Guide
:POW
:SCAL
expected_value
Space
DEF
"Optional Parameters"
Description/Defaul t
A numeric value for the expected power level. The units of
measurement are dBm and W. The default units are defined
by UNIT:POWer.
:REL
:AC
,
resolution
DEF
on page 126 for additional details on the
MEASurement Commands
,
source list
Range of Values
Sensor dependent
[a]
DEF
2
135