Keysight Technologies P Series Programming Manual page 406

10 SENSe Subsystem
[SENSe[1]]|SENSe2:TRACe:UNIT <character_data>
This command sets the units for the trace for the specified channel.
Syntax
SENS
Parameters
Item
character_data
Example
SENS2:TRAC:UNIT W
Reset Condition
On reset the units are set to dBm.
406
1 :TRAC
2
Description/Defaul t
– DBM: dBm
– W: Watts
Space
:UNIT
?
Range of Values
DBM
W
This command sets the trace units for
Channel B to Watts.
Keysight N8262A Programming Guide
character_data