Error Messages - Keysight Technologies P Series Programming Manual

Modular power meter

Hide thumbs Also See for P Series:

Table of Contents

TRACe Subsystem

Error Messages

– If a P-Series sensor is not connected, error –241, "Hardware missing" occurs.

– If a P-Series sensor is connected and Free Run trigger acquisition is selected,

error –221, "Settings conflict" occurs.

TIf you attempt to measure a pulse out of the range of the capture, for example,

measure the 5th pulse and there are only 4 pulses displayed, the power meter

returns #0##9.91E37 as the result.

Keysight N8262A Programming Guide

Table of Contents