Interpreting Am/Fm Metrics Error Messages; Test Tone Not Found - Keysight Technologies FieldFox A Series User Manual

AM/FM Metrics (SA Only and Option 355)

Interpreting AM/FM Metrics Error Messages

Interpreting AM/FM Metrics Error Messages
This section discusses possible AM/FM Metrics error messages and how to
correct them.

Test Tone Not Found

A Test Tone Not Found message is displayed under the following
circumstances:
— FieldFox frequency span is too wide
— No side lobes are displayed in the results
Refer to the examples in
"Test Tone Not Found - Corrected Example" on page
Keysight N9927-90001 User's Guide
"Test Tone Not Found - Example" on page 520 and
521.
519