3
Error Messages
Introduction
This section contains information on error messages. It explains how to read the
N432A error queue and lists all the error messages and their probable causes.
When there is a hardware-related problem, for example, a sensor overload, the
error is indicated on the status line at the top of the display. In addition, errors are
also written to the error queue. If there is any error in the error queue, the
front-panel error indicator is displayed as shown in the figure below.
Other errors can also be generated when the N432A is being operated over the
remote interface. These errors also display the error indicator and are written to
the error queue.
Figure 3-3
To read the error queue from the front panel:
– press
To read the error queue from the remote interface, use:
– the SYSTem:ERRor? query.
116
Error indicator
Error indicator
>
Error List
message.
and use
to scroll through each error
Next
Keysight N432A User's Guide